1． Forging production was conducted under the conditions of hot metal such as mild steel forging temperature range between 1250 ~ 1250 ℃), because there are a lot of manual labor, a bit not careful burns may occur

　　
　　2．Forging heating furnace and the heat of ingot in the workshop, casting and forging continuously spread out a lot of radiant heat (by the end of the forging in the forging press, still has quite high temperature), workers are often thermal radiation.

　　
　　3．Forge heating furnace in the combustion process of smoke into the air of workshop, not only affect the health environment, also reduced visibility within the workshop (for heating furnace burning solid fuels, the situation is more serious), and therefore may cause accidents.

　　
　　4．Used in forging production equipment such as air hammer, steam hammer, friction press, etc., are impact from work. Equipment under the impact load, is easy to damage of sudden snap (such as forging hammer piston rod), and cause serious injury accident.

　　
　　(e.g., hydraulic press, crank press hot die forging press, forging machine, coining press) shears, etc., at work, impact, although small, but suddenly damaged equipment, and so on and so forth also happen from time to tome, the operator often caught off-guard, also may lead to accidents.

　　
　　5．Forging equipment in the work force is very big, such as such as crank press, stretching forging press and hydraulic press forging equipment, their working conditions are relatively stable, but the strength of its working parts is very big, such as the country has been made and used the 12000 t forging hydraulic press. Is the common 100 ~ 150 t press, the strength is made by big enough. If slightly when the mold installation or operation is not correct, most of the reaction is not a role on the artifacts, but the effect on the mold parts, tools or equipment itself. In this way, some mistakes or tool to install the improper operation, it may cause damage to parts and other equipment or serious accidents.

　　
　　6．Blacksmith's tools and auxiliary tools, especially the hand forging and cold forging tool, clamp, such as various, these tools are in the work place. At work, the tool can be replaced frequently, deposit is often messy, it is bound to increase the difficulty of these tools to check when the need to use a tool in the forging and often cannot quickly find, sometimes & other; Make & throughout; Using similar tools and therefore tend to cause accidents.

　　
　　7．Due to the forging shop in occurrence of noise and vibration in the operation of the equipment, make the work place noisy ear-piercing screech, affect the person's hearing and the nervous system, distracted, thus increase the likelihood of an accident.